kevlar corolla part out
Posted: Mon Aug 24, 2009 8:33 pm
I have some items left,
A pair of Kouki axles,
A set of blue ngk wires,
4 way whiteline front sway with heim endlinks,
Rolling chassis includes,race seat,custom steering shaft and QR hub and wheel,15 gallon fuel cell,fuel pump,rear housing with the custom equal lenght 3 link set-up,zenki diff(open),brakes all around including calipers loaded with hawk hp+ pads,5 pc stainless brake line set,custom heim jointed steering arm(inner pivot of the lower control arm is relocated,needed to correct bumpsteer)new master cylinder,8 point cage,seat is mounted to the cage not the floor,full composite body AND all the moulds to build another complete corolla.
Its gotta go to make room,asking 3k canadian for the chassis and moulds-moulds are worth close to that alone.
Bolt whatever suspension bits and engine combo you want and enjoy one of the best handing corollas you will see anywhere.
A pair of Kouki axles,
A set of blue ngk wires,
4 way whiteline front sway with heim endlinks,
Rolling chassis includes,race seat,custom steering shaft and QR hub and wheel,15 gallon fuel cell,fuel pump,rear housing with the custom equal lenght 3 link set-up,zenki diff(open),brakes all around including calipers loaded with hawk hp+ pads,5 pc stainless brake line set,custom heim jointed steering arm(inner pivot of the lower control arm is relocated,needed to correct bumpsteer)new master cylinder,8 point cage,seat is mounted to the cage not the floor,full composite body AND all the moulds to build another complete corolla.
Its gotta go to make room,asking 3k canadian for the chassis and moulds-moulds are worth close to that alone.
Bolt whatever suspension bits and engine combo you want and enjoy one of the best handing corollas you will see anywhere.
