Freshly built 4age swap for sale $1200!!! A steal!!!
Posted: Tue Sep 04, 2012 3:54 am
I'm selling my 4age redtop/bigport. I just built this engine and had it tuned, drove it around for a couple months and pulled it. Engine runs great and pulls surprisingly well. Properly broken in and changed the oil at the typical intervals. Engine is worth much more, and has a known history unlike JDM engines that are worn out and stock. Engine is just sitting around in a climate controlled garage so in no rush to sell but as it says I'm flexible on the price. Might consider trade for a Honda. Shoot me a call/text (512) 415-022nine. I work night shift so call anytime.
I am located in Abilene about 2hrs west of Dallas.
Includes: Complete 4age (detailed parts list below), T50 transmission w/ extended short throw, New OEM radiator with e-fan & hoses, aftermarket oil cooler and sandwich plate, 2 ecu's and GTS complete front harness. I was running Megasquirt so I don't have the MAF or igniter/coil but are pretty easy to find. The local junkyard has 3 complete setups just sitting around, FWD stuff is all the same and super cheap. Pics below.
Engine bottom end specs
-Bored out .20 over 4age 7rib block
-ARC race main and rob bearings
-ARP main bolts
-light weight chromoly flywheel
-Techno Toy Tuning pulleys
-oil sandwich plate w/-10 an fittings for oil cooler setup
-brand new alternator and custom Heim joint tensioner.
Top end
-full Pnp 16v head
-HKS valve springs
-OBX header & midpipe (not pictured)
-TVIS delete
-TRD 5mm HG (discontinued)
-New valve stem seals
-ARP head studs
-NGK wires
-240cc injectors
-HKS air filter with Parker Aviation coupler and expansion clamps.
E-mail is dennis.wheeler@hotmail.com but just call me I'm cool.
I am located in Abilene about 2hrs west of Dallas.
Includes: Complete 4age (detailed parts list below), T50 transmission w/ extended short throw, New OEM radiator with e-fan & hoses, aftermarket oil cooler and sandwich plate, 2 ecu's and GTS complete front harness. I was running Megasquirt so I don't have the MAF or igniter/coil but are pretty easy to find. The local junkyard has 3 complete setups just sitting around, FWD stuff is all the same and super cheap. Pics below.
Engine bottom end specs
-Bored out .20 over 4age 7rib block
-ARC race main and rob bearings
-ARP main bolts
-light weight chromoly flywheel
-Techno Toy Tuning pulleys
-oil sandwich plate w/-10 an fittings for oil cooler setup
-brand new alternator and custom Heim joint tensioner.
Top end
-full Pnp 16v head
-HKS valve springs
-OBX header & midpipe (not pictured)
-TVIS delete
-TRD 5mm HG (discontinued)
-New valve stem seals
-ARP head studs
-NGK wires
-240cc injectors
-HKS air filter with Parker Aviation coupler and expansion clamps.
E-mail is dennis.wheeler@hotmail.com but just call me I'm cool.