www.86garage.com

Have some 4ac bits laying around after my swap. Any single cam guys are free to come pick it up (Plano), otherwise it's getting tossed. Things I have are :
4ac head
2x 4ac intake manifolds
4ac exhaust manifold
4ac carb, was de-choked, de-vacuumed
4ac alternator
4ac bottom end (minus the bare block itself, keeping this for another project)
4ac flywheel/clutch

If anyone wants/needs these they're yours!

any hope of shipping that crank pulley? I'd pay for shipping of course. let me know

Yea, let me pull it off tomorrow and see if it'll fit the smaller USPS flat rate box. I'll keep you posted.

Thanks a bunch for you trouble!

whee are you located? ill take the carb with intake and clutch but ill take it all if its all or none.

he's in Plano, TX. Rex is an awesome guy, just for the record. Been a buddy of mine for awhile now. He's good people, and an awesome guy to deal with.

thanks mckenney, for the kind words good sir.
ga_goosh, you're free to pick up whatever you like, all of it, pieces of it, whatever; just tryna help out whoever needs/wants single cam stuff.

Dang, my 4ac just took a crap tonight and I'm pretty sure the head is toast. Is the head by any chance still salvageable?

It was running when pulled. Head has new valve stem seals too. But it was still burning a bit of oil once it warmed up, possibly valve guides? Definitely usable though.

Ill come by today/tonight if that is ok. I live in the area.

Got any stuff left ?

still have most of it. intake manifolds are gone, distributor is gone.