Need: A/C Bracket w/Pulley

[tex]

Anyone happen to have an a/c bracket with the idler pulley connected to it? I think it comes off an mr2. I just installed my a/c back on my bluetop, but I'm not using power steering, and think I need this bracket to get it working right. If there's another way to do this, I'm all ears.

[bt20v]

With help from Mckenney we reversed the tension on the stock one and changed the pulley so it works. Pm him and he will break down the parts needed.

[tex]

Was the original pulley connected to the power steering bracket, or was it a seperate bracket? Heres a pick of my current setup , but there is one gap like either the power steering bracket was there, or something. Either way, I no longer have my power steering bracket. My compressor bracket is still firmly attached with 3 other large bolts to the block, so this gap doesnt really bother me. Ignore the nasty ac compressor, I'm out of cleaner at the moment.

[mbehrens]

That gap is where your power steering goes the beaker you need is of an mr2 aw11 and if your near san antonio there are 2 at pick n pull off highway 16 and they both have the bracket you need with pully...

[tex]

Thanks. Ya, I figured it was mr2, but san antonio is a long ways from me, but I'm sure I can find a few mr2's around here. Unless someone has one they don't need that is, I'd rather my money go to someone here than a junkyard.

[bt20v]

I used the stock Gts brackets but yes u need part of the other bracket or snag the me2 stuff

[86boy]

I have some Mr2 stuff from the donor car aw11. ll be going out where those parts are soon to go through them. I'll let you know

[tex]

Thanks, but I've already found one. Guess I forgot to post that.