wtb 15mm wheel spacers

kevlar corolla · Post by **kevlar corolla** » Tue Aug 12, 2008 8:22 pm

Title pretty much says it all,I need a pair quickly for a track day so if you don't have any but know where to get them please pass along.

Thanks.

Post by **dr.occa** » Wed Aug 13, 2008 12:00 am

kevlar corolla wrote:Title pretty much says it all,I need a pair quickly for a track day so if you don't have any but know where to get them please pass along.

Thanks.

kevlar, have you already considered picking up 6 of the 5mm spacers from T3?

kevlar corolla · Post by **kevlar corolla** » Wed Aug 13, 2008 7:53 pm

I Just replied to Gabe,he can make 15mm spacers for $30each so I think I'll have him go ahead with those.

Just need longer studs,anyone know FOR SURE which ones to buy?.

landslideATX · Post by **landslideATX** » Thu Aug 14, 2008 5:08 pm

kevlar corolla wrote:I Just replied to Gabe,he can make 15mm spacers for $30each so I think I'll have him go ahead with those.

Just need longer studs,anyone know FOR SURE which ones to buy?.

ask gabe from t3. he has helped me out with so much info over the phone.

hvguy · Post by **hvguy** » Thu Aug 14, 2008 6:24 pm

I kept the stock studs and put washers behind the wheel. But only used 2 washers, so I still had a considerate amount of thread left.

Works if you only need a little bit spaced.

Post by **CBR_TOY** » Thu Aug 14, 2008 6:32 pm

i just used 25mm bolt on spacers.... that big of sandwich spacers seem risky

ask nacho about sandwich spacers

hvguy · Post by **hvguy** » Thu Aug 14, 2008 6:37 pm

lol, 25mm is a bit much.

Post by **CBR_TOY** » Thu Aug 14, 2008 6:50 pm

yea but i used my celica/supra's with some 175/65's

on 185's they rubbed

bolt on for the win my friend. ebay has some for cheap (sandwich)

kevlar corolla · Post by **kevlar corolla** » Thu Aug 14, 2008 8:46 pm

I'm only needing 15mm,I also only need them for 1 of my many sets of wheels so going bolt would put all my other sets to far out.I believe gabe is making them hubcentric so I'm not too worried about the thickness.

Post by **CBR_TOY** » Thu Aug 14, 2008 9:32 pm

well bolt on just means they bolt on.... it doesn't change the width

Post by **dr.occa** » Thu Aug 14, 2008 10:42 pm

kevlar corolla wrote:I'm only needing 15mm,I also only need them for 1 of my many sets of wheels so going bolt would put all my other sets to far out.I believe gabe is making them hubcentric so I'm not too worried about the thickness.

you'll be fine. look into 95 landcruiser replacement hub bolts. they may get you just enough and they're fairly inexpensive to be had at your local o'reilly's, autoz, advance, etc...

Post by **nt66** » Thu Aug 14, 2008 11:39 pm

I think you can get long wheel studs from arp to but they are kindof exspensive but you get to pick the length

kevlar corolla · Post by **kevlar corolla** » Sat Aug 16, 2008 6:21 pm

I found that SW20 MR2 uses the same stud size but 15mm longer which is perfect.

kevlar corolla · Post by **kevlar corolla** » Sat Aug 16, 2008 6:23 pm

CBR_TOY wrote:well bolt on just means they bolt on.... it doesn't change the width

Not sure what your saying,if I bolt on the wheel spacers than they stay there and my other 3 sets of wheels are now offset 15mm each side more than wanted.With the spacer I can pull them off when running any of the other sets.

www.86garage.com

wtb 15mm wheel spacers

wtb 15mm wheel spacers

Re: wtb 15mm wheel spacers