Page 1 of 1
~SHIM BANK REQUEST~
Posted: Sat Apr 27, 2013 1:02 pm
by ga_goosh
im putting my cams in and I have 3 valves that i cant gt into spec with the spacers i have so im calling for help
sizes i need:
2.7....#4 shim i think
tanks for any help
Re: ~SHIM BANK REQUEST~
Posted: Sun Apr 28, 2013 1:17 pm
by joel26
good luck man hope u find some.....
Re: ~SHIM BANK REQUEST~
Posted: Mon Apr 29, 2013 6:53 am
by ga_goosh
yea this is all thats holding me back thanks
Re: ~SHIM BANK REQUEST~
Posted: Tue Apr 30, 2013 10:14 pm
by 4agshoob
not familiar with those specs, have that in imperial?
or factory shim numbering?
Re: ~SHIM BANK REQUEST~
Posted: Wed May 01, 2013 6:21 am
by ga_goosh
that is factory shim numbering.
2.60 P# 13753-16060 T=2.60, T=2.60
2.65 P# 13753-16080 T=2.65, T=2.65
2.70 P# 13753-16100 T=2.70, T=2.70
2.95 P# 13753-16200 T=2.95, T=2.95
Toyodiy 4ag shim sizing
Re: ~SHIM BANK REQUEST~
Posted: Wed May 01, 2013 2:30 pm
by 4agshoob
yeah i was refering to #10 #12 #14, etc. lemme see what i got.
Re: ~SHIM BANK REQUEST~
Posted: Wed May 01, 2013 3:36 pm
by ga_goosh
5hu83r7 wrote:yeah i was refering to #10 #12 #14, etc. lemme see what i got.
oh ok i didnt know they where numbered that way cool let me know
Re: ~SHIM BANK REQUEST~
Posted: Fri May 03, 2013 6:45 am
by ga_goosh
bump i came across some more shims and i now only need 1 size of 2.6 let me know if you can help thanks
2.60 P# 13753-16060 T=2.60, T=2.60
cant get it from the dealer as it is on back order and no other dealer in houston has this.
SHUBERT just found the shim number the one i need is #6 if you have it
Re: ~SHIM BANK REQUEST~
Posted: Fri May 03, 2013 8:34 pm
by ga_goosh
ok so i decided i would try another cam to see if i could shim that one. well i got to the last one and i now need a shim #4 size is 2.7 .1063"
Re: ~SHIM BANK REQUEST~
Posted: Thu May 09, 2013 11:15 am
by ga_goosh
got a shim lock thread