Megasquirt DIYPNP 56k stay away!

[85levin]

so, what else do i need besides the diy kit?

[mooreofit]

the non pnp kits use a harness that is hardwired to the factory harness or used in conjuction with the relay box and harness depending on which way you want to go.

[85levin]

i was just thinking of getting this
http://www.diyautotune.com/catalog/diyp ... p-384.html" onclick="window.open(this.href);return false;

and the cable to connect with the laptop

[mooreofit]

nice.i dont know if i feel comfortable enough to assemble myself.

[dr.occa]

nice.i dont know if i feel comfortable enough to assemble myself.

you would after a few beers

[mooreofit]

followed by epic failure

[MadeInThe80s]

What motor are you running? If its a 4age you want the 42pin diypnp kit. I would also suggest doing the AFM bypass and getting the GM IAT. It gets a huge bottleneck out of your intake system.

[MadeInThe80s]

followed by epic failure

Its not near as hard as it looks, but then again I have been repairing electronics for 10+ years. Practice practice practice.

[mooreofit]

what do you charge for assembly?

[MadeInThe80s]

Thats a good question. Ive had several people ask me to do it. My main thing is knowing your setup and what needs to be hooked up etc wiring wise. Then I can flash the base map to it and send it back. Wouldnt be alot seeing as I already have all the equipment. Its just more of a time type of thing.

[85levin]

black top with 1nz coils. would rather run ignition coils sequential rather than waste spark. want to remove idle air control valve and o2 sensor. add a wb o2 innovate lc-1 db. other than than run stock equipment without using another trigger wheel.
thanks

[mooreofit]

cool!

[85levin]

just ordered. also ordered db9 tuning cable. i should be ordering the lc-1 innovate wb o2 next week off ebay.

[mooreofit]

the lc1's really arnt much more expensive strait from the manufacturer. maybe 5 or 10 bucks. its worth not dealing ebay.

[85levin]

thanks alan i will try that instead.