Page 1 of 1
4AGZE Pistons
Posted: Thu Jun 09, 2011 10:06 am
by dr.occa
For visual reference:
4AGZE Ceramic Coated STD Pistons
Manufacturer: Toyota
(note: prices are only for providing comparative information so current rates may vary)
13101‑16131‑01 ＳＴＤ, MARK 1 $92.24
13101‑16131‑02 ＳＴＤ, MARK 2 $92.24
13101‑16131‑03 ＳＴＤ, MARK 3 $92.24
13101‑16131 O/S 0.50 $92.24
Re: 4AGZE Pistons
Posted: Thu Jun 09, 2011 12:06 pm
by McKenney
Mine?
Re: 4AGZE Pistons
Posted: Thu Jun 09, 2011 4:26 pm
by dr.occa
McKenney wrote:Mine?
Yes.
Re: 4AGZE Pistons
Posted: Thu Jun 09, 2011 4:33 pm
by McKenney
Sexy! Yay!
Re: 4AGZE Pistons
Posted: Thu Jun 09, 2011 6:12 pm
by yotarolla
I like how it says ART on the inside!
Re: 4AGZE Pistons
Posted: Mon Jun 13, 2011 2:07 pm
by bt20v
whats the difference between mark 2 and mark 3? Mark one is discontinued.
Re: 4AGZE Pistons
Posted: Mon Jun 13, 2011 2:46 pm
by dr.occa
Check the numbers on your block. They should be stamped either on the top or bottom of the block IIRC...or maybe on the side???
Re: 4AGZE Pistons
Posted: Mon Jun 13, 2011 4:13 pm
by bt20v
ok cause I was looking at getting a set for my 20v cause I have some plans im working on
Re: 4AGZE Pistons
Posted: Tue Jun 14, 2011 9:32 am
by McKenney
mark 1=AW11 4agze, mark 2= AE92 4agze, mark 3=AE101 4agze...
Re: 4AGZE Pistons
Posted: Tue Jun 14, 2011 3:08 pm
by bt20v
ok but would the mark 3 pistons clear the bt20v head?
Re: 4AGZE Pistons
Posted: Tue Jun 14, 2011 5:57 pm
by McKenney
As long as your timing is correct should be fine... the 20v is an interference motor stock so get your timing right and you'll be fine.
Re: 4AGZE Pistons
Posted: Mon Feb 25, 2013 4:26 pm
by ga_goosh
McKenney wrote:mark 1=AW11 4agze, mark 2= AE92 4agze, mark 3=AE101 4agze...
are you sure about that?....i know i know zombie
Re: 4AGZE Pistons
Posted: Mon Feb 25, 2013 4:45 pm
by McKenney
that was according to my guy at Toyota... thanks for reminding me of other parts I gave away to help someone out in a pinch!