Page 1 of 1
AE86 COILOVER DIY
Posted: Fri Aug 24, 2007 3:00 am
by pecx
<object width="425" height="344"><param name="movie" value="
http://www.youtube.com/v/7KWCDDBbpNc&hl ... ram><param name="allowFullScreen" value="true"></param><embed src="
http://www.youtube.com/v/7KWCDDBbpNc&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>
Posted: Thu Sep 20, 2007 8:41 pm
by CBR_TOY
SO HOW MUCH DID THEY TAKE OUT OF THE CASING? i', gonna do this but run 9/8kg
Posted: Tue Sep 25, 2007 12:23 am
by CBR_TOY
anybody!!!!!!!!!!!!!!!!!! i gotta know!
Posted: Tue Sep 25, 2007 1:39 pm
by pecx
Well I guess it depend. What thickness of spacer (at the bottom) you got or getting?
Posted: Tue Sep 25, 2007 3:40 pm
by CBR_TOY
iis that what he taped on the bottom of the strut?
Posted: Tue Sep 25, 2007 7:59 pm
by pecx
Yes, T3 used to sell that kind of spacer in any size. However, I don't see it on their website anymore.
Posted: Fri Oct 26, 2007 11:11 am
by nt66
if you go on club 4ag there is a very detailed artical in the tech reference area i think it sass how much to take out and everything
Posted: Thu Nov 15, 2007 1:32 pm
by dr.occa
i didn't use a spacer at the bottom of mine.
inserted the shock cartridge i intended on using into the casing. took a dowel and put it in until it touched the top of the cartridge. marked the top of the casing on the dowel. i then added a millimeter or 2 to that.
then, i cut the length i marked on the dowel (+ the 1-2 mm i added to it) out of the casing starting an inch below where the threading for the gland nut ends and downward...etc...etc...