Too low?

Kaidotech · Post by **Kaidotech** » Mon Jun 04, 2012 1:53 pm

Wondering what people think of my AE92. I just finished lower it by myself, took almost 5 hours because I installed arm bars and braces as well.

Had a few people tell me it was "too low"

Kaidotech · Post by **Kaidotech** » Mon Jun 04, 2012 1:56 pm

Also can anyone chime in on the quality of KYB AGX adjustable struts + the AE92 ground control four corner adjustable sleeve kit?

JDMwhiteboy · Post by **JDMwhiteboy** » Mon Jun 04, 2012 1:59 pm

You build your own, not anyone else. But that's not low at all, like in my opinion (just my two cents) you have plenty more room to go lower

JDM AE86 · Post by **JDM AE86** » Mon Jun 04, 2012 2:15 pm

No such thing as too low as long as it drive over a penny.

Kaidotech · Post by **Kaidotech** » Mon Jun 04, 2012 3:46 pm

I dont know how I would go any lower. The transmission pan is about 2.5" from the ground and I cant put a jack under it anymore.

Still hoping someone can chime in on the GC sleeves before I pull the trigger to order them

UncleTonyBerman · Post by **UncleTonyBerman** » Mon Jun 04, 2012 3:48 pm

I like it... looks good, but a little lower would still be nice

joel26 · Post by **joel26** » Mon Jun 04, 2012 8:12 pm

Looks good....

Post by **dr.occa** » Tue Jun 05, 2012 7:44 am

Take a picture of it from the side without the Super Model camera angle. We'll be able to assess the ride height better.

Manifesto · Post by **Manifesto** » Tue Jun 05, 2012 11:18 am

that doesnt look too low to me. looking good. as for the coilovers. i owned a second hand set for my corolla, i wasnt impressed. this is not to say i thought they sucked ass either. i think you are getting what you pay for. AGX are AGX after all.

Kaidotech · Post by **Kaidotech** » Tue Jun 05, 2012 12:41 pm

It's been settling. Its actually sitting a little lower then this picture now. Threw on a Mach I lip from a friends car since the front looked goofy.

I'm calling BC racing on my break from work to price just two coilovers.

Kaidotech · Post by **Kaidotech** » Tue Jun 05, 2012 3:02 pm

dr.occa wrote:Take a picture of it from the side without the Super Model camera angle. We'll be able to assess the ride height better.

Best I could get, ran out during my 15min break. You'll see it tonight

AznTKDmstr · Post by **AznTKDmstr** » Tue Jun 05, 2012 4:34 pm

that's not too low! you should rock whatever ride height you want, forget what others say!

this is how i ran around for a while, don't care howww many people said i was too low, haha

Kaidotech · Post by **Kaidotech** » Tue Jun 05, 2012 5:21 pm

AznTKDmstr wrote:that's not too low! you should rock whatever ride height you want, forget what others say!

this is how i ran around for a while, don't care howww many people said i was too low, haha

I need to get some skirts and a big lip like that. Shit looks legit!

Manifesto · Post by **Manifesto** » Thu Jun 07, 2012 12:08 pm

AznTKDmstr wrote:

needs moar low

86boy · Post by **86boy** » Sun Jun 10, 2012 2:37 am

did you "raise" the trans/driveshaft tunnel up to get that low? or just letting the bumpstop sit on the diff?

www.86garage.com

Too low?

Too low?

Re: Too low?

Re: Too low?

Re: Too low?

Re: Too low?

Re: Too low?

Re: Too low?

Re: Too low?

Re: Too low?

Too low?

Too low?

Re: Too low?

Too low?

Re: Too low?

Re: Too low?