Bluetop wiring harness with redtop ECU and motor??

[Munki]

Would it be possible to use a ae86 blue top wiring harness on a JDM ae92 redtop ECU and motor? Or would I need to mod the blue top harness??

[JDM AE86]

I know more of the jdm parts. but using a USDM harness on the JDM engine shouldnt be a prob. As long as you change out all coolant sensors and such that may have different connecters. As for the ECU it may not work plug an play. You may have to swap a few wires. Get a pin layout of both ECU's and you will be able to tell if all wires line up.

[dr.occa]

as long as it were a TVIS operated AE92 ecu. they should share the same type of connectors: 10pin 18pin and 14pin.

you'll have to relocate some of the pin outs to different spots and different connectors. i.e. the intake temp sensor on the us tvis harness is on the 14 pin connector but i believe it's on the 18pin connector for the jdm tvis ae92 harness.