Will a 16v engine from a 94 corolla fit in a ae86
-
- Tourist
- Posts: 119
- Joined: Wed Mar 14, 2012 8:41 pm
Will a 16v engine from a 94 corolla fit in a ae86
Now what I am asking can the motor be swaped into a ae86 using the stock tran that I have which is a sr5 84 model ae86 any info on this will help out
-
- Hades - Site Admin
- Posts: 7734
- Joined: Tue Sep 04, 2007 1:49 pm
- Location: On my hiney...in HOU
- Contact:
Re: Will a 16v engine from a 94 corolla fit in a ae86
Are you referring to the 4AFE? If so, yes actually. Water, electrical and intake routing is another story.
-
- Tourist
- Posts: 119
- Joined: Wed Mar 14, 2012 8:41 pm
Re: Will a 16v engine from a 94 corolla fit in a ae86
Not sure if 1.6 or the 1.8 women has a running engine but bad tranny said I would give her 450 for it since there is no tittle figure that's a good buy to swap in to my car
Re: Will a 16v engine from a 94 corolla fit in a ae86
it would have to be wired in. not to bad if youve done it a few times. a huge nightmare if your not familiar with wiring diagrams and electronics.
the intake manifold will be facing the firewall so a u bend or manifold refabricating.
the flex plate should bolt up from the 4ac.
you can get these motors cheap at the junkyard. theres a guy here who did a 7ac thats the 1.8l bottom end with the 4ac top end. i also see 4ag's at the junkyard 2-3 times a year.
the intake manifold will be facing the firewall so a u bend or manifold refabricating.
the flex plate should bolt up from the 4ac.
you can get these motors cheap at the junkyard. theres a guy here who did a 7ac thats the 1.8l bottom end with the 4ac top end. i also see 4ag's at the junkyard 2-3 times a year.
[img]http://i300.photobucket.com/albums/nn17/mooreofalan/attachment-2-1-1-1-1.jpg[/img]
-
- Tourist
- Posts: 119
- Joined: Wed Mar 14, 2012 8:41 pm
Re: Will a 16v engine from a 94 corolla fit in a ae86
I'm really thinking on doing the 7ac also this is one hell of a kicker um did any one of the 4ac tuner guys notice that all the lower block parts will work with there engines it's a 6 bolt crank and they have Pullys as well from what I saw minus the headers