Page 1 of 1
edis4 system and megajolt running coil on plugs???
Posted: Fri Feb 25, 2011 3:01 am
by yngtunr
hey guys im wondering if anyone has run coil on plugs from the edis4 ignition module?? im assuming it would work fine if you wired the coil on plugs as a waste spark setup with two coils triggered at the same time...would this cause any issues...seems like it would work beautifully but must use the 2wire cop...
hoping this works cuz i want to use cop and i want to run megajolt...
Re: edis4 system and megajolt running coil on plugs???
Posted: Mon Feb 28, 2011 1:58 am
by yngtunr
bump!! any experience doing this....im thinking running two edis modules in tandem to handle the load of the coils as essentially the edis module only fires one coil per two cylinders...if i tandem the two modules to the megajolt they will receive fire signal at the same time...have one fire #1 and the other fire #4 and of course #2 and #3 on their other channel....i dont see any issues with this just looking for prior experience/ feedback
Re: edis4 system and megajolt running coil on plugs???
Posted: Mon Feb 28, 2011 8:55 am
by dr.occa
Re: edis4 system and megajolt running coil on plugs???
Posted: Mon Feb 28, 2011 10:40 am
by yngtunr
cool deal...my assumption was correct...thanks