With a 4ac clutch and flywheel
Work with a red top 4age?
I was told it would but didn't believe him
Figured I would ask you guys
4ac clutch
4ac clutch
1984 Toyota Corolla- Drift Project
"Those aren't mudflaps!! They are mullets for tires!"
"Yall Doin That Skid Racin Again?"
Stay Sideways My Friends!
- JDMwhiteboy
- VIP Member
- Posts: 1534
- Joined: Mon Feb 08, 2010 8:38 pm
- Location: Dallas, TX
Re: 4ac clutch
well it depends if its a 6 bolt or 8 bolt fly wheel. If they both are 3 rib blocks then they should be 6 bolt flywheel and should work. The later 7 rib is the 8 bolt and see if that matches.
I like cars, food, and puppies.
Re: 4ac clutch
The 4age is a 7rib
1984 Toyota Corolla- Drift Project
"Those aren't mudflaps!! They are mullets for tires!"
"Yall Doin That Skid Racin Again?"
Stay Sideways My Friends!
- JDMwhiteboy
- VIP Member
- Posts: 1534
- Joined: Mon Feb 08, 2010 8:38 pm
- Location: Dallas, TX
Re: 4ac clutch
well if the block you have is 7rib then it should be an 8 bolt flywheel. The clutch should be the same no matter what, but the flywheel you might have to swap
I like cars, food, and puppies.
-
- Hades - Site Admin
- Posts: 7734
- Joined: Tue Sep 04, 2007 1:49 pm
- Location: On my hiney...in HOU
- Contact:
Re: 4ac clutch
it also depends on the clutch surface on the fw. i believe it may have a smaller circumference to that of the 4AGE motors.
Re: 4ac clutch
Ok kool thanx guys
Still learnin lol
I don't want to get rid of the clutch
It's practically brand new
If it was capable to swap it over I'd do that
Before I bought a bran new clutch
I can get a new flywheel no problem
Still learnin lol
I don't want to get rid of the clutch
It's practically brand new
If it was capable to swap it over I'd do that
Before I bought a bran new clutch
I can get a new flywheel no problem
1984 Toyota Corolla- Drift Project
"Those aren't mudflaps!! They are mullets for tires!"
"Yall Doin That Skid Racin Again?"
Stay Sideways My Friends!