www.86garage.com

need some more help is there a way i can know how my injectors go on my 16v trying to get it done tonight

they should lay in order once you lay out the harness.

i dont know about the 20v but the 16v use a two bank batch fire and you can just throw them on if it dont fire right switch them around till it idles good. but 1 and 3 are grounded by the ecm at the same time and the injectors fire twice per cycle and the 2 and 4 are on the same circuit. let me run out and check to see if the wre colors are different between the 1-3 and 4-2

wiring diagram pm'ed


also 1and 2 are on the same circuit and 3-4 are on the same circuit. not how i explained earlier

ok thanks ill try to get it thanks