Headgasket question

MadeInThe80s · Post by **MadeInThe80s** » Sat Nov 07, 2009 12:02 pm

Ok, so im going to be running a 16v head with a gze bottom end and im not sure which gasket to get. I understand buy the gasket that matches the head, but im going to be using the over sized gze pistons and wasnt sure if that changed my format any. I see cometic has 81mm and 83mm sizing and assume moving up sizing affected this as well. Any input would be greatly appreciated.

Post by **CBR_TOY** » Sat Nov 07, 2009 12:13 pm

here are some places that have hg's for the 4a.....

HKS ini 82mm with different thicknesses.....
http://www.hksusa.com/products/?id=732

HKS in 82mm with .7mm.....
http://thmotorsports.com/hks/hks_metal_ ... 08-03-1990

Toda 82.5mm with .6mm/.8mm/& 1mm.....
http://www.todaracing.com/en/product/gasket/4ag.html