Page 1 of 1
4ac clutch
Posted: Mon Mar 29, 2010 5:06 pm
by 16vHachi
With a 4ac clutch and flywheel
Work with a red top 4age?
I was told it would but didn't believe him
Figured I would ask you guys
Re: 4ac clutch
Posted: Mon Mar 29, 2010 7:30 pm
by JDMwhiteboy
well it depends if its a 6 bolt or 8 bolt fly wheel. If they both are 3 rib blocks then they should be 6 bolt flywheel and should work. The later 7 rib is the 8 bolt and see if that matches.
Re: 4ac clutch
Posted: Mon Mar 29, 2010 7:38 pm
by 16vHachi
The 4age is a 7rib
Re: 4ac clutch
Posted: Mon Mar 29, 2010 8:55 pm
by JDMwhiteboy
well if the block you have is 7rib then it should be an 8 bolt flywheel. The clutch should be the same no matter what, but the flywheel you might have to swap
Re: 4ac clutch
Posted: Mon Mar 29, 2010 8:57 pm
by dr.occa
it also depends on the clutch surface on the fw. i believe it may have a smaller circumference to that of the 4AGE motors.
Re: 4ac clutch
Posted: Mon Mar 29, 2010 9:21 pm
by 16vHachi
Ok kool thanx guys
Still learnin lol
I don't want to get rid of the clutch
It's practically brand new
If it was capable to swap it over I'd do that
Before I bought a bran new clutch
I can get a new flywheel no problem