www.86garage.com

what toyota/lexus vehicle has the same lug nuts as the celica/supra wheels. i went to the dealership to get some lug nuts and they said that they dont have cars that old in there system and cant look up the lug nuts for me but i saw some wheel locks on the wall that i thought would work so i know they have them and i need some for my wheels. also what oem lug studs are the longest that fit the rolla i have been wondering cuz i want to use some spacers on my wheels.

err, I use LONG lug nuts on all of my wheels, like, longer than my OEM 4runner lugs.

It makes it easier to spin off when I;m constantly changing tires.

They look crazy on most rims. But I know will "NT66" has some. Never bothered to look at them tho

When I pulled some off of alex's "overdrift" car, it was a 85? celica GT. And it had stubby flat washer type.... here, leme take a pic of one.

---please wait a moment---

here they are, they look just like the OEM celica lug nuts

ummm I dont have long lugs I have the ones in your picture

nt66 wrote:ummm I dont have long lugs I have the ones in your picture

I know-

I was saying I prefer the long ones

ga_goosh wrote:what toyota/lexus vehicle has the same lug nuts as the celica/supra wheels. i went to the dealership to get some lug nuts and they said that they dont have cars that old in there system and cant look up the lug nuts for me but i saw some wheel locks on the wall that i thought would work so i know they have them and i need some for my wheels. also what oem lug studs are the longest that fit the rolla i have been wondering cuz i want to use some spacers on my wheels.

studs, i recommend going with studs from a '97(could be wrong on year) landcruiser. here's the oreilly p/n: 610-266. they're a little longer but to really get longer wheels studs you might actually have to spend the money and get aftermarket extended studs.

a have the lc studs on the rear and they're a little more than enough for a mere 5mm spacer.

other than that, if you want to go out more than pick up a set of the 25mm spacers that will bolt up to your hubs using the existing studs. around $125+ a pair.

forgot the thread pitch on the studs but they're either 1.25 or 1.5. the CB7 (4th gen accord) share the same lug nut size as well as the bolt pattern (4x114.7 or 4.5 in domestic-ese).

vatozone/advance/o'reilly's all carry the lugs you seek young pattyone...

and jonas is right on the studs i just don't know what year either

240sx lugs are the same thread pitch

240's have a different thread pitch...

are you sure? I put my wheels on a 240 and I used my lug or so I thought

i am sure...

hvguy wrote:err, I use LONG lug nuts on all of my wheels, like, longer than my OEM 4runner lugs.

It makes it easier to spin off when I;m constantly changing tires.

They look crazy on most rims. But I know will "NT66" has some. Never bothered to look at them tho

When I pulled some off of alex's "overdrift" car, it was a 85? celica GT. And it had stubby flat washer type.... here, leme take a pic of one.

here they are, they look just like the OEM celica lug nuts

those are the lug nuts im looking for but the dealership says that the car is too old and not in there systems anymore so i need to kow if there is another car that has something that will work with my celica supra wheels unless there is some where else i can get them cuz i cant find them

go to autozone or whatever and just get some new ones... they're cheap

dr.occa wrote:

ga_goosh wrote:what toyota/lexus vehicle has the same lug nuts as the celica/supra wheels. i went to the dealership to get some lug nuts and they said that they dont have cars that old in there system and cant look up the lug nuts for me but i saw some wheel locks on the wall that i thought would work so i know they have them and i need some for my wheels. also what oem lug studs are the longest that fit the rolla i have been wondering cuz i want to use some spacers on my wheels.

studs, i recommend going with studs from a '97(could be wrong on year) landcruiser. here's the oreilly p/n: 610-266. they're a little longer but to really get longer wheels studs you might actually have to spend the money and get aftermarket extended studs.

a have the lc studs on the rear and they're a little more than enough for a mere 5mm spacer.

other than that, if you want to go out more than pick up a set of the 25mm spacers that will bolt up to your hubs using the existing studs. around $125+ a pair.

forgot the thread pitch on the studs but they're either 1.25 or 1.5. the CB7 (4th gen accord) share the same lug nut size as well as the bolt pattern (4x114.7 or 4.5 in domestic-ese).

ok cool i read some where that the landcruiser lugs would work but i am too lazy to look it up again. i also have been looking at the 25mm hubs but not sure if i want to spend the cash yet i was looking at ebay and they are like 50 bux but im not sure about ebay crap

CBR_TOY wrote:go to autozone or whatever and just get some new ones... they're cheap

yea they are like a dollar just needed to make sure i get the right ones

CBR_TOY wrote:i am sure...

well sorry for the mis information then