Page 1 of 2
Headlights
Posted: Fri Oct 24, 2008 8:44 pm
by CBR_TOY
i have a couple of problems.... when i initiate a drift/hard grip to the left my headlights pop up and come on
also, i can't get my brights to turn off. i was sliding one night and had the brights on and broke the damn lever.
i tried another assembly but that still did nothing
p.s. my car fails mechanically/electronically
Posted: Fri Oct 24, 2008 9:18 pm
by H8S
BUY A TOYOTA
Posted: Fri Oct 24, 2008 9:52 pm
by CBR_TOY
uh... rick
IT IS A TOYOTA!!!
Posted: Mon Oct 27, 2008 6:50 pm
by CBR_TOY
any help guys... i've tried everything
Posted: Mon Oct 27, 2008 7:39 pm
by Nasser
just disconnect it by unplugging it, it just dangles behind the light kind of and takes a second you could do that for the time being i guess till u fix it.
Posted: Tue Oct 28, 2008 11:12 pm
by CBR_TOY
no no no... the headlights work.
the brights won't turn off.... even after i switched out the controls
Posted: Thu Oct 30, 2008 2:31 am
by Overdrift
have you tried using a hammer?
hvguy says it is a relay stuck. I still think the hammer will repair your troubles.
Posted: Thu Oct 30, 2008 9:15 am
by dr.occa
Overdrift wrote:have you tried using a hammer?
hvguy says it is a relay stuck. I still think the hammer will repair your troubles.
and at the same time give you new ones.
i'm against ghetto fixes unless they...are...all...that...is...left.
Posted: Thu Oct 30, 2008 4:18 pm
by CBR_TOY
it is mechanically sound... they go up and down and turn on/off
the problem, if yall would read, is they stay on the brights all the time. so no low beams
Posted: Fri Oct 31, 2008 9:01 am
by dr.occa
CBR_TOY wrote:it is mechanically sound... they go up and down and turn on/off
the problem, if yall would read, is they stay on the brights all the time. so no low beams
maybe your headlight potentiometer could be the culprit. i've got an extra one. call me.
Posted: Thu Nov 13, 2008 8:40 pm
by CBR_TOY
brights still won't turn off but i figured out, at least i think, the random on/off issue
the harness i believe is rubbing where it goes through the firewall....
Posted: Fri Nov 14, 2008 3:32 pm
by Dorikun
Have you tried Zip-ties?
Posted: Fri Nov 14, 2008 4:03 pm
by dr.occa
CBR_TOY wrote:brights still won't turn off but i figured out, at least i think, the random on/off issue
the harness i believe is rubbing where it goes through the firewall....
lol, do this, grab some 5/16 hose, cut it to length that would make the size of the firewall hole, then split the hose down the middle and voila! you've got a easy to install firewall grommet!
Posted: Fri Nov 14, 2008 5:32 pm
by CBR_TOY
that's what i plan on doing(grommet)
just need to make time
Posted: Fri Nov 14, 2008 5:56 pm
by dr.occa
CBR_TOY wrote:that's what i plan on doing(grommet)
just need to make time
make time AND grommet.
on another note (and from another thread)...buy my side skirts!
