COP (Coil On Plug) waste spark setup with Megajolt Lite Jr.

[dr.occa]

"A picture's worth a thousand words"


Coils used are from the 1MZFE V6 non-waste spark setup p/n: 90919‑02211

Megajolt Installation guide

Megajolt Operation guide

[EvilCerealBoX]

Is megajolt basically megasquirt without the fuel side?

[dr.occa]

You could say that.

It's stand alone programmable ignition.

[JDMwhiteboy]

I like this setup, I was talking with hondarue last night and he gave me the idea of instead of using a vr sensor on the 16v why not use a dummy dizzy? It would look like the 20v swaps when guys dont want to bang in their fire wall. thoughts?

[dr.occa]

Ted, sorry I'm just now responding to this. The only issue with using a dummy distributor is mounting the appropriate trigger wheel in it. It would have to be a 72-2 trigger wheel and a small one at that. At high rpms the signal becomes VERY shallow which then leads to very poor spark performance if even any.

The reason for the 72-2 trigger wheel is because for every 1 revolution of the crank the distributor makes a 1/2 revolution.

[JDMwhiteboy]

Ah thanks, Ive looked around and Ive deciced on a different set up than the dummy. However your insite does still help