wheel fitting question

Shocks, springs, coil overs, ride height, bracing, cages, etc...

Moderators: dr.occa, CBR_TOY

Post Reply
88novarolla
Tourist
Posts: 32
Joined: Tue Mar 01, 2011 4:24 pm
Location: Addison, Tx.

wheel fitting question

Post by 88novarolla »

ok so i have a stock 5-jx13-45 wheels on my nova and i was looking at some stock scion steelies for cheap cuz they are 15 and wider but they are a 35 offset opposed to my 45 offset anyone know if there will be any problems with this or if it will work???

88novarolla
Tourist
Posts: 32
Joined: Tue Mar 01, 2011 4:24 pm
Location: Addison, Tx.

Re: wheel fitting question

Post by 88novarolla »

they are the scion xb wheels and tires

dr.occa
Hades - Site Admin
Posts: 7733
Joined: Tue Sep 04, 2007 1:49 pm
Location: On my hiney...in HOU
Contact:

Re: wheel fitting question

Post by dr.occa »

what's the width on your current wheel(s) and how much distance is there between the inside of the fender and the top of the wheel? If it's less than 10mm most likely you're going to rub. This is my best guess. Anyone else?

User avatar
CBR_TOY
Moderator
Posts: 4053
Joined: Wed Aug 15, 2007 10:00 pm
Location: under the 86
Contact:

Re: wheel fitting question

Post by CBR_TOY »

scion steelies are15 x6 i think so it would essentially be adding 22.7mm which is almost an inch more width so measure the gap and see if you can fit that much more


it's a tad under an inch btw
JDM AE86/AE92


Post Reply