www.86garage.com

Looking to see what everyone else likes to run. Not a wishlist post what you actually have on your car currently.

1985 Toyota Corolla
converted to Manual steering from an AW11
T3 manual rack bushing
MKiii intermediate steering column shaft
PS inner tie rods
T3 outer tie rods
T3 Steering Knuckles
BC coilover BR type 30 way adjustable all 4 corners
T3 4-link
T3 Panhard Bar
stock LCA ball joints
everything else up front is stock currently including the bushings.

Tires: Toyo Extensa HP 195/50/15

The alignment specs I'm after
Caster: 3 degrees
Camber: negative 2.5-3 degrees
Toe: 0

Post your setup!

10 seconds of searching will find you hundreds and hundreds of AE86 chassis set-ups.

I wanted to see what the 86garage people ran. This wasn't a "me wanting to copy your setup" thread. Quite similiar to the "post pics of your ride" threads only with suspension mods. So you should post up your suspension. As I know there are other threads about this, but its kinda cool to see all the differences between people and their tastes for driving.

People like me don't have the privilege yet to to make custom pieces. Some peoples suspension is all home made and custom where as like mine its bought parts that I put on. Trying to spark up some more discussion on this board

ill play lol

1986 Corolla GT-S
ae86 manual steering rack
t3 manual rack bushing
mkIII int. shaft
ps knuckles
new manual inner and outer tie rods
new ball joints
prothane bushing kit
front cusco copy strut bar
t3 coilovers (4 corners)
sw20 kyb struts 4 way adjust camaro rear kyb shocks 8 way adjust
front 8k/mm springs rear 325ft/lb springs
cusco camber plates
t3 rca
DIY 4 link bars.
ebay traction brackets
battle version panhard bar

oh i almost forgot running whatever is available 190/60/14 or federal 185/55/14 depending on what set of wheels i happen to have on ATM

if it wasnt mentioned it is still stock lol yes that means the lsd...still stock open kouki diff

so far i like it it feels solid and handles well

yes it does get pretty quiet around here sometimes

Hatch:
BC Racing
Battle Version NCRCA
Homemade Traction Brackets
Adjustable 4 links & Panhard from Paradise Racing
T3 Tension Rods
Whiteline Front & Rear adjustable sways


Coupe:
Front -
T3 Camber plates
T3 Hats
Shortened front casings with SW20 AGX cartridges
Coilover collars & perches from Paradise Racing
QA1 10" 8K (450lbs) springs
Adjustable factory tension rods

Rear -
T3 Traction Brackets
BC Racing Hi/Lo spring perches & 6K (350lbs) springs
"Maro" AGX shocks
Factory 4 links & modified factory panhard

nice Jonas i was thinking about making some traction brackets too

ga_goosh wrote:nice Jonas i was thinking about making some traction brackets too

They're really easy to make.

dr.occa wrote:

ga_goosh wrote:nice Jonas i was thinking about making some traction brackets too

They're really easy to make.

lol yea thats the best part

1986 Corolla GT-S Coupe
AE86 Power Steering (yes, I like my creature comforts)
Prothane bushing kit
Lowering springs (brand still to be determined)
Stock snowflakes for the time being
Stock LSD

1987 Corolla GT-S
MR2 manual steering rack
t3 manual rack bushing
mkIII int. shaft
ps knuckles
new manual inner and outer tie rods
poly bushing kit
tanabe strut bar
Megan coilovers
Megan camber plates
t3 rca

Rear -
7.5 Celica supra diff (with 86 mounts)
T3 Traction Brackets
Megan coil overs
Factory 4 links (poly bushings)
T3 panhard



85 GTS Hatch

Megan racing springs
tociko blue shocks
Factory LSD
Stock otherwise

werd! That's cool as hell! I like seeing the differences people take due to the cost... or just like to build your own stuff!

front:
megan coilovers 8kg springs
megan RCA's
new OEM LCA's w/ bush and balljoint
godspeed sway bar
prothane end links
brembo rotors
new OEM calipers
braided lines

rear:
godspeed 4 link
godspped lat bar
T3 traction brackets
megan shocks
megan springs 6kg
braided line
shitty drums

on the Levin:
Front:
P.A.S.S. Racing coilovers
Billstein HD drop-ins.
Swift 9.5kg springs
Tein camber plates
Cusco RCAs
RA65 LCAs with steering stop removed
AW11 MR2 manual rack with AE86 power steering inner and outer tie rods and custom u joint
OEM tension rods with Moog poly bushings
cross member spaced down 2"
Hondarue big brake kit
and no front sway bar for now.

Rear:
Celica Supra 7.5" diff w/ AE86 spring perches(unmodified other than perches with 3.91:1 gears
stock 4 links w 14mm ID rear bushings(all new OEM)
T3 Celica Supra diff to AE86 panhard
Swift 6.5kg springs
Bilstein HD short stroke shocks
stock GTS rear sway bar with Energy suspension RED poly bushings
AE86 GTS rear brakes, stock but all new even ebrake cables

1985 Toyota Corolla
converted to Manual steering from an AW11
T3 manual rack bushing
MKiii intermediate steering column shaft
SW20 AGX adjustable cartridges with t3 spacers
cut springs (1 coil front, 1.5 rear)

Kyb agx sw20 shocks
Modified tubes with 40mm removed
6k ground control coil overs

Rear
Swift springs
Monroe v6 camaro shocks

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2