Page 1 of 1
42 mm crank pilot bearing
Posted: Sat Jul 27, 2013 10:39 pm
by outlaw88
Hello I'm trying to find out what pilot bearing I can use on 4age I used a 42mm 4azge crank and am going to use a T50 trans I see a lot of 4agze motors going it ae86s but I cant seem to find info on the pilot bearing. Any info would be very helpful, thanks.
Re: 42 mm crank pilot bearing
Posted: Sat Jul 27, 2013 10:44 pm
by dr.occa
The pilot bearings are all the same outlaw. Whether it's a 42 or 40mm crank, the bearing doesn't change. The hole for the pilot bearing in the crank is the same across the cranks and the input shaft of the T50 isn't any different.
Re: 42 mm crank pilot bearing
Posted: Sat Jul 27, 2013 10:45 pm
by morgan
It should accept the only pilot bearing they make for the 4age, from an ae86.