Dash Harness to Engine Harness Question
Posted: Wed Apr 18, 2012 10:00 am
Finally got the plug I needed to connect the dash harness to the engine harness, however, we ran into a problem with the wiring colors on the existing dash harness and the piece I got to solder into it. For the most part all the colors matched up. I've attached a picture of the 2 wires that didn't line up and what we soldered them too after looking at the schematics and the engine harness plug.
so we connected
Brown and White(engine side) to White(dash harness side)
Red and White(engine side) to Black and White(dash harness side)
also, we had a White and Blue wire on the Dash harness side that didn't run to anything on my engine harness. I figured this was AC related after looking at Schematics and my old destroyed harness.
and we had two Black wires with Red dots(ground dash harness Side) that we had to solder together to one Black with Red Dots(engine harness side) since there wasn't two.
Any feedback would be fantastic.
so we connected
Brown and White(engine side) to White(dash harness side)
Red and White(engine side) to Black and White(dash harness side)
also, we had a White and Blue wire on the Dash harness side that didn't run to anything on my engine harness. I figured this was AC related after looking at Schematics and my old destroyed harness.
and we had two Black wires with Red dots(ground dash harness Side) that we had to solder together to one Black with Red Dots(engine harness side) since there wasn't two.
Any feedback would be fantastic.