www.86garage.com

what do you guys run on your 10 inch wheels? I have 1 inch flares in the front and 3 inch flares out back. I feel like a 205 is probably going to be too aggressive of a stretch for the back.

Brad runs 205/50/15 rear on a ten inch rim...

Sent from my LG-MS690 using Tapatalk

what rim size are you running. I assume 15's?

Yea I'm sorry I have 15 inch eagle alloys. I'm new to tire stretching so I was curious.

you are gonna have to roll and stretch the hell out of the rear quarters to clear 10 inch wide rims even with a stretched tire. what year is your corolla?

yea i would have to agree with mckenney use a 205/50-15 and yes a roll and pull will need to be done

I did a piss poor job of giving y'all info. I have a 1980 wagon that I have installed 3 inch flares on the rear.

10 inch rim and a 205/50/15 and I recommend the Dunlop DZ101 or Federal tires they handle the stretch better. you can order a 215/50/15 too if you dont wanna stretch the hell out of them.

i would like to not stretch the tires like crazy. i cant for the life of me find 215 50's. would a 225 50 be ok? I guess i really need to mount the rim and measure what clearance i have. any suggestions on how to load the suspension to see my clearance without putting the rim on the ground?

also has anyone ever run across a 4x114 to 5x5/5.5 lug adapters?

4EyedGoon wrote:also has anyone ever run across a 4x114 to 5x5/5.5 lug adapters?

I feel like eBay would have that.

Hey TedD, didn't you get a whiff of that decomposing odor when you opened the door before you walked into this room .

Slightly off topic, but what does the contact patch look like on a stretch that wide?

I stickied a reference Gambler. Not sure if it'll help though.

I was hoping someone had a pic for a visual. Thanks.

BTW, I added Offset and Tire Calculators to the sticky.