www.86garage.com

This is my long running cooling kit to drop a 20V in any RWD:


OK now the main part is the rear bypass plate:







Sensors installed and with optional heater barb:


Custom order for turbo water return:




The side block off plate:

Comes with Silver Zinc coated high tensile bolts:




Top water outlet:

Bolts right into head as one pre-assembled peice.





-These bolt right into the engine in a quick and easy process without any mods to the engine. However the idle control valve will need to be moved down one position if a heater is still used.

- Lot's of room between the rear bypass and the firewall.

- No unpleasant external water pipes

- Proven design used by myself and others for many years on and off the racetrack.

- The rear and front parts use the original bolts/nuts/studs.

- Choice of heater use or not.

- Rear bypass suits the shape of the head and is a very solid part.

- Suits original water pump front and rear half and a common external thermostat out of an ae82/93 corolla.

Questions welcome.


More info in my cooling guide:

http://s-86.com/s-newcoolingguide.html


Price for a kit is $190 USD + some registered post.

doesn't look too shabby, let us know how it works ok.

This is one AWESOME price seeing that most water line relocation kits cost in the upper $500 to $600 range. SO being at 190 is a very good price!

thanks DjSpecter, I know I can sell them for much more but for now I don't. I like selling something that works and is affordable. You see I loath seeing external water pipes on 20V RWD conversions.

lightsae86: what would you like to know exactly?

I have individual install guides here:

rear bypass:
http://s-86.com/forum/viewtopic.php?f=4&t=39

side block off plate and top outlet:
http://s-86.com/forum/viewtopic.php?f=4&t=28

oh nothing. i have the rs chita kit from awhile back. just saying you know ;p

yeah no problem. Unlike the SS works and the T3 kit I really like the RS Chita kit. Their top outlet is a work of art.

which water pump are you using?

and can you post up good pics of the upper/lower water neck mods?

thanks man

how long would it take to get that upper water neck you sell to the states?

CBR_TOY wrote:which water pump are you using?

and can you post up good pics of the upper/lower water neck mods?

thanks man

how long would it take to get that upper water neck you sell to the states?

assuming that question was aimed at me, I amke my kits to suit the standard two halfs of the 20V pump. The top outlet does not have it's bypass facing the right way to suit a RWD pump although I could plug it up easy enough.

I dont mod either of the water necks, bottom one is reused as is and the top one is thrown out.

Assuming I had some ready it takes about a week and a half with normal post to arrive there if I had some ready. Seeing I need to cut some more out it would take a little longer.

so this one...... bolts right up to the head. i understand this.









but what do you do about the backside of the water pump?

sorry to be so confused but i'm just trying to figure this out and can never get a reasonable answer or picture

yeah no problem



joins to number 7, see here:

http://s-86.com/forum/viewtopic.php?f=4&t=37" onclick="window.open(this.href);return false;