www.86garage.com

So my friend and i are building a 85 corolla gts that is getting built for drifting this car was almost stock before my friend got it off my other friend

he didnt have it for 3 weeks when he wanted to boost it i told him to wait but nope he didnt and he has never boosted a car before and blow it up #4 rod bearing called it a day and turned in flakes





#4 rod cap on the left got so hot it went black as you can see the one on the right is what it should look

now for the car sorry i dont have a before shot of the car did a wire tuck to the car





to the moon

jdm monkey lol

new motor in 4age 20v black top all the wiring is done by me still have lots of work still but should be running soon



ok so the tranny is in and the motor is almost all wired up

hydro e brake is done










header on

under hood wiring is done

GOD!!!! i need to get off my ass and put mine in already!!

3 yrs and it still sits.....

i suck at life

it will be running this weekend

tuan, is the hyd-handbrake still tied into the e-brake cables? if so, aren't you at all concerned about wearing out the cylinder and eventually developing fluid leak when parking her or are you guys just going to park it in gear?

dr.occa wrote:tuan, is the hyd-handbrake still tied into the e-brake cables? if so, aren't you at all concerned about wearing out the cylinder and eventually developing fluid leak when parking her or are you guys just going to park it in gear?

the nice thing about this setup is the stock cable's will all hook up and work like stock so on the street pull the pin and the hydro will just sit there on the track back off the cable and put the pin back in and hydro e brake for drifting

looks good. helleva job man. -sang

car is running now

http://www.youtube.com/watch?v=GoBMXYOyuMI" onclick="window.open(this.href);return false;

td-civ wrote:car is running now

http://www.youtube.com/watch?v=GoBMXYOyuMI

good job on that!

glad it runs.

dr.occa wrote:

td-civ wrote:car is running now

http://www.youtube.com/watch?v=GoBMXYOyuMI

good job on that!

glad it runs.

thanks next thing that is getting wired up is a aem fic

here are pics of some of the part we had to make


when i started to do the harness

one thing i hate is bad wiring so you will never see bad wiring on anything i work on








more to come

car is on the road and is running mint still have a lot of work to do on the car

more pics


when we started doing the 16v water pump swap

as you can see you would never know that this car has a hydro e brake

now you can

sweet stealth hydro-break.... me likey!

STLove wrote:sweet stealth hydro-break.... me likey!

thanks and all it cost me was 10bucks to make it

really? the whole break system? you should totally make a group buy of that shiz!