supra 2jz single fatpig build!

[aj.hudson]

Figured I'd share my latest build with yall im about 75% so I got alot o pics but y'all won't mind I'm sure haaha.

STP61959 by ae8620vlevin, on Flickr

2010-04-10 19.50.19 by ae8620vlevin, on Flickr

Here is how I got it.


2010-05-23 16.48.03 by ae8620vlevin, on Flickr

2010-05-23 16.47.31 by ae8620vlevin, on Flickr
Interior was okay..but boooo auto!


CIMG1068 by ae8620vlevin, on Flickr

CIMG1073 by ae8620vlevin, on Flickr

CIMG1077 by ae8620vlevin, on Flickr

CIMG1075 by ae8620vlevin, on Flickr

CIMG1078 by ae8620vlevin, on Flickr
Then came the 2j.....2jzge to be exact..not impressive? We shall see...but first it needed some refreshing and a MLS stopper headgasket for turbo duty... off with the head and in the trunk..



IMG_20110323_205606 by ae8620vlevin, on Flickr

IMG_20110323_205606 by ae8620vlevin, on Flickr

IMG_20110323_211951 by ae8620vlevin, on Flickr

IMG_20110323_212012 by ae8620vlevin, on Flickr

IMG_20110323_212403 by ae8620vlevin, on Flickr

IMG_20110323_212412 by ae8620vlevin, on Flickr

IMG_20110323_212859 by ae8620vlevin, on Flickr

IMG_20110323_212905 by ae8620vlevin, on Flickr

IMG_20110331_181107 by ae8620vlevin, on Flickr
http://www.flickr.com/photos/33711404@N ... 768069860/" onclick="window.open(this.href);return false;

Going back together. I forgot to take some pics along the way but its got arp studs stopper hg arp rod bolts and a brand new rear sump setup. Head was resurfaced valve seals replaced valves reground and 3 angle valve job along with re shimming cams.new seals aswell..


IMG_20110403_170410 by ae8620vlevin, on Flickr

IMG_20110403_170417 by ae8620vlevin, on Flickr

IMG_20110403_170528 by ae8620vlevin, on Flickr

IMG_20110403_170538 by ae8620vlevin, on Flickr
turbo mockup. there is already issues i have adjusted and more i still need to address... but it looks good eh?

[aj.hudson]

IMG_20110403_170445 by ae8620vlevin, on Flickr


IMG_20110403_170633 by ae8620vlevin, on Flickr

IMG_20110403_170626 by ae8620vlevin, on Flickr
payed out the nose for this... it took alot of time to get it lookin this clean..


IMG_20110413_162038 by ae8620vlevin, on Flickr


IMG_20110413_165313 by ae8620vlevin, on Flickr
Brand new jz bellhousing!


IMG_20110403_170707 by ae8620vlevin, on Flickr
Wrong oil pan!


IMG_20110413_162044 by ae8620vlevin, on Flickr
Brand new Stock 1j fly and arp hardware(they are 4ag!!)



IMG_20110419_144520 by ae8620vlevin, on Flickr

IMG_20110419_144150 by ae8620vlevin, on Flickr
Is300 coils and new connectors with my clean ass wiring!


IMG_20110419_201341 by ae8620vlevin, on Flickr

IMG_20110419_201416 by ae8620vlevin, on Flickr
painted sucked and clearance to turbo needed fixing..


IMG_20110426_154851 by ae8620vlevin, on Flickr

IMG_20110426_154953 by ae8620vlevin, on Flickr

IMG_20110426_155000 by ae8620vlevin, on Flickr
powdercoating! Sweet! but the coater did not know any better, and coated the flange surfaces... and he even argued it would be okay! lol..nope


IMG_20110426_154800 by ae8620vlevin, on Flickr
a machine shop provides a much better surface.


IMG_20110426_184247 by ae8620vlevin, on Flickr

IMG_20110426_184300 by ae8620vlevin, on Flickr

IMG_20110426_185222 by ae8620vlevin, on Flickr
coil holders made out of original part for plug wires.


IMG_20110426_190024 by ae8620vlevin, on Flickr

IMG_20110426_185944 by ae8620vlevin, on Flickr

IMG_20110414_165511 by ae8620vlevin, on Flickr
waitin to drop er in!


IMG_20110503_220824 by ae8620vlevin, on Flickr
rc550 waiting for cleanin

[aj.hudson]

IMG_20110504_154034 by ae8620vlevin, on Flickr

IMG_20110504_154041 by ae8620vlevin, on Flickr

IMG_20110504_154049 by ae8620vlevin, on Flickr

IMG_20110504_182000 by ae8620vlevin, on Flickr
Out with the old..



IMG_20110504_191728 by ae8620vlevin, on Flickr

IMG_20110504_191735 by ae8620vlevin, on Flickr

IMG_20110507_194651 by ae8620vlevin, on Flickr
In with the new...well almost..


IMG_20110504_200547 by ae8620vlevin, on Flickr
these are pre89 brackets... I have a 91..



IMG_20110507_194347 by ae8620vlevin, on Flickr

IMG_20110507_194359 by ae8620vlevin, on Flickr
turbo clearance sucks Im gonna have to cut n weld comp housing.


IMG_20110507_194659 by ae8620vlevin, on Flickr
cleaned injectors and installed all new seals, also blasted the fuel rail and drilled and tapped for an fittings.



IMG_20110513_181431 by ae8620vlevin, on Flickr
Put my shifter on so I can make some cool noises and pretend!
Also while Im on drivetrain not pictured is the spec stage 3 clutch and a new slave and master along with brand new shift fork and hub release(which was a pain to install btw!) and a full braided line from master to slave.

[JDMwhiteboy]

Nice I like what I see so far. Are you making the motor mounts yourself or buying them?

[CBR_TOY]

damn nice looking build and i've always liked the Power Enterprise belts

[aj.hudson]

Actually Its a gates kevlar belt^ but I believe they actually make the PE belts and greddy aswell.. I got the mounts from driftmotion. but after seeing em I do have the rescources and skill to make em.. oh well saves me some time..

[aj.hudson]

IMG_20110414_164043 by ae8620vlevin, on Flickr

IMG_20110414_164029 by ae8620vlevin, on Flickr

IMG_20110414_164012 by ae8620vlevin, on Flickr

IMG_20110414_164054 by ae8620vlevin, on Flickr

IMG_20110414_164104 by ae8620vlevin, on Flickr
I got anxious to see how they looked so I threw on one side and set my Tein coilovers a bit lower really quick. Also if you cant tell I got some blingy super duper badass lightweight Ti. Lugnuts!


IMG_20110514_160625 by ae8620vlevin, on Flickr
went junkyard hunting and scored!! some connectors a new ignitor for my stinger ems setup and a relay box for a clean oem look. Also got a paseo throttle cable cause stock was way too short.


IMG_20110514_183417 by ae8620vlevin, on Flickr
well it was Waaay too long and needed the supra mounts.. luckily I am pretty handy with a dremmel and some titanium devcon (really expensive jbweld)I got at the shop! I cut it to the correct length and cut the sheathig accordingly then put on the supra firewall mount and used adhesive shrinkwrap to assist holding it in place. Then with a sparkplug cardboard piece filled with devcon and put the cable through, I then removed the cardboard and cut the devcon down to look oem. ^ Sorry Only pic I got..



IMG_20110513_181449 by ae8620vlevin, on Flickr
with a little work it gained some clearance.. but still needs some intervention with a tig!



IMG_20110520_193057 by ae8620vlevin, on Flickr

IMG_20110520_193110 by ae8620vlevin, on Flickr
And here is the final result! I am pretty impressed with myself if I do say so!!

Anyways now you all are current and I got some more work to do!

[dr.occa]

That's a trick looking MKIII man. The wheels really sets it off better than most MKIIIs I've seen over the years. Very nice build AJ.

[mooreofit]

diddo^ the wheels are a good choice for the car.

the motor is badass.

[aj.hudson]

Thanks guys. I like the wheels and planned on getting them powdercoated to be the same color front it gravity gullflame and out back is xxr 522 as you probably noticed front is 18 while the rears are 19. The plan all along was Rs wats in 16x9.5 all around but I cant buy new as it would cost waaay too much and its almost impossible to find in 5x114.3 bolt pattern used..Im looking into building some bbs rs in 16x9.5 and thats the way Ill probably go as the 19s wont offer me the traction needed and the 16s will...aswell as better tire selection for the 16s..Im leaving to yuma for a month or so and plan to finish when I get back. Stay tuned for more updates.

[joel26]

looks good

[aj.hudson]

Been awhile, got some work done.

manifold and downpipe welded.




Just love this pic


Wiring almost sorted, first rough draft of diagram, parts are i and almost finished panel

[aj.hudson]

New intercooler. wont work too well with the stock intake manifold.




crap pic

closeup welded mount to bumper support

Koyo RAD and FAL fans.

[aj.hudson]

Couple of teaser pics (and motivation for me..)


O hai!

O whats this!??


Might have somethin to do with this..

Yep, lower runner cut and base plate welded on

[aj.hudson]

a few roughdrafts..




Also started working on hot side piping. Heres what I got, still need to weld though.




And trimmed the intake and mocked up


And finally! Sorry about the bad pic, it was late when i finished.