well the sr will surely be faster tho86 race car build
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
eh yeah win some loose some. ive had crazy good luck at events and i guess this one haunted me, thats ok though. I REALLY want an sr20det, ive had SOOOO much fun with a carb 4ag, and the power is amazing this motor makes but i want drop in easy cheap more power and an sr20det is the way to go.ga_goosh wrote:man what a day you had.
BTW posted up stuff for sale!
suspicious garage
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
well the motor runs, the manifold fix was easy drill the stud out and retapped it and threaded in a new stud just fine, that was easy, but then the starter dieing, and it being so hott, me being tired as hell for a diff swap that night, ect just made a crap day.
i got the car running today, runs good no problems with the motor itself, its just i need stability, reliability, and less hassle. though the carb 4age is crazy fun, but for what im doing i need more power hahaha, and not have to tweak with a car all the time.
i got the car running today, runs good no problems with the motor itself, its just i need stability, reliability, and less hassle. though the carb 4age is crazy fun, but for what im doing i need more power hahaha, and not have to tweak with a car all the time.
suspicious garage
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
thats the motor set i bought, and im looking at some intercoolers. I found a bunch in the size im looking for with a piping kit for around 155$ or i can buy a core itself for 75$ and use steel piping. I figure hell for 155$ and a piping and coupler kit with the correct sized intercooler im looking for.
fab some motor mounts up, and a trans mount, cut shifter hole, sell all my 4age parts, wiring ect. wont be to hard to do, and get POWER....and EFI and reliability.
suspicious garage
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
-
toyota85ae86
- Member
- Posts: 152
- Joined: Fri Apr 17, 2009 1:03 pm
- Location: olympia wa
- Contact:
piping
cx racing intercooler and piping kit, bought for 150$ shipped.
room full of junk
t25 flanges to make the S bend for the turbo relocation, I need to find some good thick 90 bends and make the turbo S how jesse had it done, and Efrian, I MIGHT have you weld it, if you can tig weld it, its a pretty critical part and i think tig welding it will be way better. But im going to need some heavy duty piping so it wont break in the end. flanges are 1/2" thick and came with gaskets for 30$ shipped
then:
piping route, im going to mount the intercooler HIGHER up and then the 2 holes on each side of the core support, the pipes fit right through. the cold side will be one J bend a 90 to the tb and a coupler to the intercooler. its simple. i will make brackets to mount it up higher. basicly the lights WONT close, they dont anyways so i dont care, in fact im going to remove the motors and weld the linkage to the housing and make them permanant open.
obviously i will mount it level only for demo purposes :D :D
fuel pump on order
http://cgi.ebay.com/ebaymotors/MSD-2225 ... ccessories
I like ordering through ebay because i can use my paypal account, and really if you know what to look for on ebay you can find deals.
suspicious garage
