No 4ac but a.......

DjSpecter · Post by **DjSpecter** » Fri Sep 25, 2009 11:47 pm

What has over 200,000 miles and runs real rough and is in my corolla right now....

Yep the stocker 4ac. After going to a car meet tonight with a fellow 86garage member I have found what engine is going in the corolla the following week to come.

What goes BRAP BRAP BRAP and spins frealy and shoots fire?

inertia · Post by **inertia** » Fri Sep 25, 2009 11:49 pm

a 10hp briggs&straton lol

erickz300 · Post by **erickz300** » Fri Sep 25, 2009 11:59 pm

a gatling gun

A WANKEL?

inertia · Post by **inertia** » Sat Sep 26, 2009 12:03 am

your dead to me DjSpecter you have gone to the darkside ?
hey i need a trans swap you got the part lmk whats up?
i guess it make two of us running 4ac

daveskatesallday · Post by **daveskatesallday** » Sat Sep 26, 2009 2:59 am

4ag ftw!

DjSpecter · Post by **DjSpecter** » Sat Sep 26, 2009 4:55 am

daveskatesallday wrote:4ag ftw!

4AG FTMFL!!! LMAO yea I am against it cause I know that I was sooooooooooooooooooo close to getting the swap done but never finished. I know I know im a failure. My mom says the same thing to me.

But nope im going to the DARKSIDE and throwing a 12A streetported in that hoe.

Baad you say?? I think not!! light wieght and reliable and yet affordable.

Jorsh · Post by **Jorsh** » Sat Sep 26, 2009 8:35 am

looks like ericz300 wins the prize..

mooreofit · Post by **mooreofit** » Sat Sep 26, 2009 8:37 am

rotaries are gay....

Projectgofast · Post by **Projectgofast** » Sat Sep 26, 2009 9:14 am

mooreofit wrote:rotaries are gay....

+1 they should be called explodotaries

mooreofit · Post by **mooreofit** » Sat Sep 26, 2009 10:01 am

rotards

mexellent · Post by **mexellent** » Sat Sep 26, 2009 11:06 am

Rotaries: 50% of the time they run everytime.

big slice · Post by **big slice** » Sat Sep 26, 2009 11:17 am

haha so how many miles you have on the 4ac DJ? I might beat you.

Post by **dr.occa** » Sat Sep 26, 2009 2:11 pm

i like rotaries myself.

i've been planning a 12A/B / 13B setup with an IDA/H/F or DCOE conversion either in a FB or FC.

apex seals are my biggest concerns especially since top self aftermarket seals are rather expensive.

daveskatesallday · Post by **daveskatesallday** » Sat Sep 26, 2009 2:11 pm

hey why the hating on the rotary

i wouldn't call them "explodotaries"

they just take a little more care and attention than other engines one of my friend's has had a fc3s for like 10yrs plus and he takes good care of that thing and it works just fine except for the ecu going bad just recently BUT the engine is fine :D

the reason ppl always hear about them detonating or not running and seeing tons of them on craigslist is b/c ppl don't know how to maintain/take care of them they think it's initial d and can just hop in the 7 and zoom! not how it works

and you gotta love the sound of a rotary nothing beats it!

BUT i'll stick with my corolla

just thought i'd throw my 2 cents in on the rotary

Overdrift · Post by **Overdrift** » Sat Sep 26, 2009 4:32 pm

Never seen a rotary explode unlike piston engines which I have seen many times. Rotaries have fragil seals and apex seals but if you dont cheap out like the wise one above stated "Expensive aftermarket apex seals" and don't overheat it, it will be a great race engine. I just dislike the fuel consumption. I would baby my 13b and get 15mpg highway, it felt like fun but wasn't very fast lol.

www.86garage.com

No 4ac but a.......

No 4ac but a.......

.

Re: .

.