my built 20v blacktop
my built 20v blacktop
hey guys just filling yall in on what im building. some ppl have seen my car lately and were like i thought you had a 20v. right now i have the spare (brooklin accent) "race motor" 16v with motorcycle carbs that prolly puts out a whooping 110 hp at the flywheel but im giving it hell at events and still doin pretty well i might add after the carbs were tuned. but soon i will have my 20v back out that i hope will do what i want if not gunna do a 50 shot and if not then prolly go 1uz. but for now 4a all the way
sittin pretty
15x10 0 rear 15x8 -15 front
x8 in the rear here
the start of ripping it apart
motor out and the mess
the tiny bare block
new arias 81.5 pistons 11.1-1 and crower rods
Taka Aonos old 20v setup toda cams 304 dur. 9mm lift, toda cam gears, also have trd valve springs
for those interested heres the "race motor" hahaha after the above pics the 20v was out monday. tuesday vic-robert was like were goin to mean streets i said shit i pulled my motor lol, he says here put this in and blow it up hahaha so weds i get the motor after work start at 12am finish at 4am next day wire it up and fri swap tanks and drive it. saturday off to mean streets lol what a week!!
got the block back from cleaning and boring
piston next to the stocker
new one is a true 11.1-1 so the total compression should be 12-13-1 goin with a cometic 1mm head gasket just to be safe since im gunna rev it HIGH
weight on the ups scale not the best, but what ever
time for the head
rob doin his thing with the CHOPS
crank and rod time
rods done stick out alot further than the stockers
thats it for now next is the porting which kinda already started.
sittin pretty
15x10 0 rear 15x8 -15 front
x8 in the rear here
the start of ripping it apart
motor out and the mess
the tiny bare block
new arias 81.5 pistons 11.1-1 and crower rods
Taka Aonos old 20v setup toda cams 304 dur. 9mm lift, toda cam gears, also have trd valve springs
for those interested heres the "race motor" hahaha after the above pics the 20v was out monday. tuesday vic-robert was like were goin to mean streets i said shit i pulled my motor lol, he says here put this in and blow it up hahaha so weds i get the motor after work start at 12am finish at 4am next day wire it up and fri swap tanks and drive it. saturday off to mean streets lol what a week!!
got the block back from cleaning and boring
piston next to the stocker
new one is a true 11.1-1 so the total compression should be 12-13-1 goin with a cometic 1mm head gasket just to be safe since im gunna rev it HIGH
weight on the ups scale not the best, but what ever
time for the head
rob doin his thing with the CHOPS
crank and rod time
rods done stick out alot further than the stockers
thats it for now next is the porting which kinda already started.
- MadeInThe80s
- Member
- Posts: 688
- Joined: Wed Apr 15, 2009 3:45 am
- Location: Keller, Texas
- Contact:
Re: my built 20v blacktop
So with that clearance is this an interference motor now? Looks like if timing is off they'll bend your valves.
Nice work btw!
Nice work btw!
86 GTS 4AGTE
Re: my built 20v blacktop
well i would say it has more of a chance but thats why im playin safe and goin with a 1mm head gasket. there are lots of ppl with crazier setups like .8mm with the head shaved but im not worried about the comp. and luis at paradise racing said i prolly wouldnt tell a difference between .8 and 1mm prolly not even on a dyno
Re: my built 20v blacktop
wow.... i REALLY need to get mine in! this setup looks awesome
i see you got those wheels off club4ag
i see you got those wheels off club4ag
JDM AE86/AE92
Re: my built 20v blacktop
they may have been i got them from brad. and got a friend to polish the crap out of the lips look alot better now not all one color
Re: my built 20v blacktop
pic it up tomorrow, cage is done thanks to casey (tirekiller)
Re: my built 20v blacktop
ah.... yes. those are the ones from brad
they look a whole lot better with polished lips!
PICS OF CAGE ASAP!!!!
they look a whole lot better with polished lips!
PICS OF CAGE ASAP!!!!
JDM AE86/AE92
Re: my built 20v blacktop
nice
[img]http://i300.photobucket.com/albums/nn17/mooreofalan/attachment-2-1-1-1-1.jpg[/img]
Re: my built 20v blacktop
how does the 20v head work with high comp pistons like that when they are cut for 4 valves?
is this safe?
is this safe?
JDM AE86/AE92
Re: my built 20v blacktop
umm they have 5 cutouts they are 20v pistons, look at the last pic again
Re: my built 20v blacktop
no update as of yet still waiting on the headgasket almost done with the ports. lone star bash was fun but i hate that motor lol cant stand it anymore. i gave it its all to 8000 and just left it floored the whole course and could bearly maintain drift.... this 16v ftl want my 20v back, even stock would be better hahahaha
Re: my built 20v blacktop
well got the ports done bout to start assembly of the head
here is the exhaust side just smoothed the casting and rounded the edges
trd springs (shorter) vs stockers
*cage pics*
done by Casey Quillen aka TIREKILLER
didnt have to cut the dash much and just a little off the door panel
zenki door panel just closed the door and over night it molded to the cage PERFECTO!!!
low door bars just like i asked came out great still easy to work on and get in and out
now i gotta figure out what color to paint the cage lol thinkin a bronze maybe idk yet ... INPUT welcome
should be able to put all my interior back too.
here is the exhaust side just smoothed the casting and rounded the edges
trd springs (shorter) vs stockers
*cage pics*
done by Casey Quillen aka TIREKILLER
didnt have to cut the dash much and just a little off the door panel
zenki door panel just closed the door and over night it molded to the cage PERFECTO!!!
low door bars just like i asked came out great still easy to work on and get in and out
now i gotta figure out what color to paint the cage lol thinkin a bronze maybe idk yet ... INPUT welcome
should be able to put all my interior back too.