4ac intake manifold

erickz300 · Post by **erickz300** » Sat Mar 29, 2008 9:36 pm

need 4ac intake manifold asap!!!!!!!!!! mine is cracked and in pieces. willing to buy tonite or tomorrow, cause its my dd.

Post by **dr.occa** » Sat Mar 29, 2008 10:58 pm

erickz300 wrote:need 4ac intake manifold asap!!!!!!!!!! mine is cracked and in pieces. willing to buy tonite or tomorrow, cause its my dd.

you're most likely going to have to hit the junkyard's if you're in a hurry.

if pecx still has any 4AC stuff maybe he'll see this thread in a timely fashion and sell it to you. other than that, it's looking like you're going to need to do your own leg work.

hvguy · Post by **hvguy** » Sat Mar 29, 2008 11:15 pm

yeah, my starlet's mani did that.

I whipped out the welder and tigged it back together.

if you cant do that, get some MEAN flux, a torch and some solder and piece it back together. thats how I made my... uh. pressure port on my mani

erickz300 · Post by **erickz300** » Sat Mar 29, 2008 11:32 pm

my car was runnin real rough at idle and sounded like it was missfiring at any rpm. i figured it was the intake manifold due to header install and found out it was cracked and broken in three places.

hvguy · Post by **hvguy** » Sat Mar 29, 2008 11:41 pm

erickz300 wrote:my car was runnin real rough at idle and sounded like it was missfiring at any rpm. i figured it was the intake manifold due to header install and found out it was cracked and broken in three places.

just cracked in a few places and one broken off piece?

erickz300 · Post by **erickz300** » Sat Mar 29, 2008 11:56 pm

one flange is cracked and the other three are broken off

Post by **nt66** » Sun Mar 30, 2008 12:03 am

I have one I think If I do Ill let you have it for $20

erickz300 · Post by **erickz300** » Sun Mar 30, 2008 12:47 am

713-328-9864

hvguy · Post by **hvguy** » Sun Mar 30, 2008 1:12 am

nt66 wrote:I have one I think If I do Ill let you have it for $20

a 4ag guy with 4ac parts?

are you building something behind my back?

Post by **nt66** » Sun Mar 30, 2008 10:46 am

the answer to your question is yes

hvguy · Post by **hvguy** » Sun Mar 30, 2008 1:02 pm

nt66 wrote:the answer to your question is yes

I knew you would eventually come to the dark side.

Post by **dr.occa** » Sun Mar 30, 2008 8:32 pm

hvguy wrote:
nt66 wrote:the answer to your question is yes
I knew you would eventually come to the dark side.

yeah, what's building up is a pile of junk

it's not what you think.

4ac = no support
4ag = 22+ years of developed support

erickz300 · Post by **erickz300** » Sun Mar 30, 2008 9:14 pm

thanks guys but i already found one today at a junkyard. it was of a fwd corolla. now the car runs alot better maybe even better than before

Post by **nt66** » Mon Mar 31, 2008 7:38 am

dr.occa wrote:
hvguy wrote:
nt66 wrote:the answer to your question is yes
I knew you would eventually come to the dark side.
yeah, what's building up is a pile of junk

it's not what you think.

4ac = no support
4ag = 22+ years of developed support

lolololololololololololol yeah I couldnt find it anyway

hvguy · Post by **hvguy** » Mon Mar 31, 2008 11:53 am

thats why I have a mill, lathe, and access to a toyota engineer from back in the day that owns a performance shop

www.86garage.com

4ac intake manifold

4ac intake manifold

Re: 4ac intake manifold