Clutch

[BKH808]

Just wanted to know to clear up my mind. Currently in the market for a clutch for my 20v Black top. I know the stock Blue top flywheel is 200mm but the Red top is 212mm right? I have a 212mm flywheel that I would like to use on my Black top that has 8 bolts. I am looking at the SPEC Stage 3 clutch right now. Just to know for sure I should be alright for this application.

http://performance.yoparts.com/i-176908.aspx" onclick="window.open(this.href);return false;

[supra_750]

should be the right one if its for the 212mm. call and ask to be sure but i think so.

[CBR_TOY]

i think you can run a 200mm also as long as you run the flywheel and everything

blue/redtop are 200

silver/blacktop are 212mm

[CBR_TOY]

can anyone confirm this?

[dr.occa]

200mm and 212mm is referring to the clutch mating surface. you can run either on the 4AG motors. you'll just want to make sure you have the appropriate clutch plate to take advantage of the slightly larger diameter clutching surface if you go 212mm.

actual fly wheel outer diameter should be the same.

keep in mind the starters are nearly pretty much the same across the board for the 4AG motors.

[supra_750]

ya as long as you buy a clutch and pressure plate for a 212mm everything will work fine thats what im running. toda lw 212 flywheel with toda 212 clutch and pressure plate

[BKH808]

Hope it goes well. Ordered a the SPEC clutch for the '92 GTS.

[CBR_TOY]

ok.... i'll probably order a 200mm clutch and use my stock flywheel from the 16v for the 20v

this will work correct?

or should i buy a 212mm spec and run stock 20v flywheel?

[supra_750]

it will work eather way but the 20v has a lighter stock flywheel. so if i were doin it i would use the 20v

[BKH808]

Sweet clutch came in, fit right on my Red top Small Port Flywheel.

[Sam-Q]

ah a 6 puck, would you be kind enough to let me know the driveablity is once you have it installed.

[BKH808]

Yes, I would. By the way Sam, I was the one from Hawaii that bought your by pass kit recently.

[Sam-Q]

oh hey Brice, I didn't even pay attention to the username funny enough

[dr.occa]

bryce, is that the stage 2 or stage 2+? a spec clutch is next on my list of needful things; for both the 86 and te38 wagon.

[BKH808]

This is a Stage 3.