Perfect Power SMT6 Piggyback ECU, RSR Ex-Mag GT2 (muffler)

Moderators: dr.occa, CBR_TOY

Post Reply
assassin10000
Tourist
Posts: 85
Joined: Tue Jun 08, 2010 2:39 am

Perfect Power SMT6 Piggyback ECU, RSR Ex-Mag GT2 (muffler)

Post by assassin10000 »

Perfect Power SMT6 - Piggyback ECU

This is one of the few options out there that works with an AFM (flap style - Air Flow Meter). It also works with MAF & MAP sensors. I do have wiring diagrams from perfect power for the BT 20V, 91+ 4agze and a bunch of others. I couldn't locate the original CD/box that came with it, but I did backup the software/manuals to my harddrive so I can email them to you.

It is lightly used, I original installed it in my 4x4 Tacoma when I was planning on turboing it. But never got around to it, so while it was in the truck and working I never really used it except to experiment/play with a little bit.


Image


From: http://www.perfectpower.com/in...id=62
Feature | Benefit
Throttle Sensor learning feature | Fits to any throttle position
RPM Calibration | To suit your installation
High RPM range | Ideal for racing
Fuel map with 128 sites | Smooth Programming
Ignition Map with 128 sites | Fine Ignition resolution
Injection Map with 128 sites | For extra (boost!) injection
0 - 10 volt Analogue range | Allows tuning of most models
6 Amp injector drive | Handles 6 x 16 ohm injectors
Various ignition outputs | For the most stringent applications
Selectable Trigger points | To suit your application
Programmable Cylinders | It works on any amount of cylinders!
Selectable polarity | To Suit your application
Can handle interlaced signal | For 4 cylinders ignition output tuning
Balanced Inputs | Inverted Outputs
Missing Tooth Signal | For up to 2 teeth advance/retard
Ignition output limit | Limits max. advance and retard
Fuel High Low Limit | Prevents overdriving the ECU
Small Size | Fits Anywhere
Low Battery Drain | Simple Installation
Self Checking Test Available | For Extra Confidence
Map Switchable | While you drive!
All Inputs Protected | No mishaps!
Crystal Controlled | For Stability
Encapsulated | For Moisture and Dust
Easy Tuning Software | DOS or WINDOWS
Low Component | Count High MTBF
10 MIPS computing | To facilitate quick engine response
Signal Conditioning | To prevent miss trigger
Engine profiles (library) | Easy set up
Lambda Signal Tuning | Modification of Lambda Senor Readings
Proportional Nitrous Control | Less waste of power in nitrous injection
Adjust Dwell Time | For very basic standalone applications
RPM or Airflow or Analogue Defection or Temp Switch/Set Point | For CAM switch and similar applications
Cost me about $400, asking $200 shipped (lower 48).



RSR Ex-Mag GT2 (muffler only)

One of the most awesome sounding exhausts for the AE86, it's 2.25" inlet. It does have the silencer (installed in the pictures). Used, some dents/dings and scrapes on the bottom from use.

Got rid of the original piping and went under diff.

Image

Image


$180 shipped (lower 48).

Andrew

assassin10000
Tourist
Posts: 85
Joined: Tue Jun 08, 2010 2:39 am

Re: Perfect Power SMT6 Piggyback ECU, RSR Ex-Mag GT2 (muffle

Post by assassin10000 »

Bump, lowered price on smt6.

Andrew

assassin10000
Tourist
Posts: 85
Joined: Tue Jun 08, 2010 2:39 am

Re: Perfect Power SMT6 Piggyback ECU, RSR Ex-Mag GT2 (muffle

Post by assassin10000 »

TTT.

Andrew

Post Reply