supra 2jz single fatpig build!

joel26 · Post by **joel26** » Sun Aug 14, 2011 6:15 pm

Looks great......

bt20v · Post by **bt20v** » Thu Aug 18, 2011 4:58 pm

very nice I wish I had the tools and the time to do soemthing like this.

aj.hudson · Post by **aj.hudson** » Mon Oct 31, 2011 10:24 pm

Some updates if anyone still cares....

fuel line setup part one, This should be good enough for 400whp with the denso tt pump and 550's
will be adding another set of lines and another denso to a dual feed center return rail.. Stinger is already wired for 2 pumps and i can tune the 2nd one to come whenever...

Welded up.

I scored these at the junkyard for less than 100$

Rebuild time... this is a pre 89 lsd diff which has a better lockup than the 89+ i have in mine...

weir performance parts and solid shim..

Got the correct tools to do the job.

Worked out pretty good, I took my time ad got all the right backlash and it turned out perfect.
Should act like a real lsd now...

aj.hudson · Post by **aj.hudson** » Mon Oct 31, 2011 10:43 pm

mocked up waiting to get welded.... when I get time haha.

got this badboy to relocate my ps resivoir.

Full flow oilcooler setup with built in thermostat.

Not quite finished battery relocation but it fits nice and discretely under the hatch carpet.

Free space for IC piping.

Started modding my dash for afr and boost gauge but now going a different route...

The top piece is a r154 speed sensor to convert it from the cable driven to digital signal.Which is needed for.........

ap1 s2k dash!

Still in the test fit/early stage.... but you get the idea.

And as it sits right now...

Post by **dr.occa** » Tue Nov 01, 2011 12:12 am

Nice update. Pictures are so small though

. I guess you gotta take what you can get.

aj.hudson · Post by **aj.hudson** » Tue Nov 01, 2011 1:30 am

Yeah I didnt realize I was sizing them that small... Id edit with bigger pics but Itd take too long haha.
If you want to see them at native size along with other pics i left out you can check out my picasa album here...https://picasaweb.google.com/1159068471 ... 5951/Supra" onclick="window.open(this.href);return false;

bt20v · Post by **bt20v** » Thu Nov 10, 2011 3:09 pm

killer work i like your attention to detail! and the s2k guage cluster will look good.

aj.hudson · Post by **aj.hudson** » Fri Feb 10, 2012 7:20 pm

Big update coming soon!!! Just dropped some serious coin on some parts! Supra parts and specifically 2jz parts are extremely expensive!!!!
That being said I'll give y'all a hint on the biggest purchase of recent.... It's Cnc'd and made of nice shiny aluminum....

joel26 · Post by **joel26** » Sat Feb 11, 2012 10:40 am

Looks good.. Looking forward to the new update...

aj.hudson · Post by **aj.hudson** » Sat Feb 11, 2012 3:43 pm

Well some bad news... I might need a new bottom end...
Why you ask? How could this be when it hasn't even ran? Well since I've not had a intake manifold I taped up the ports thinking all is well... I popped the hood today and the weather must've done some weird shit to the metal!!! It's been raining then warm then freezing then rain then warm again... The tape came off in places and just about every port had water sitting ontop of the valves!!!! And the 2 cylinders that the valves were open must have got into the cylinders! This sucks!!!

The worst one

The open one

And it did this to my paint on the vc... Weird!

aj.hudson · Post by **aj.hudson** » Sat Feb 11, 2012 3:48 pm

Also been putting the interior together... Got the pass seat bracket fabbed.... I'll probably have to get the bride brackets cause I can't get em any lower (my head hits the roof, I have a sunroof)... Hopefully the bride ones do.. And they better @200+ a side!!!

This is not the big update... Still waiting on parts arrival!!!

aj.hudson · Post by **aj.hudson** » Sun Mar 11, 2012 8:00 pm

most of my parts are in... Sucks.. I need new injectors now...
O well id1000 are on the way... Also ordered a radium dual Walbro 255 fuel surge tank... If your keeping track yes that's 3 fuel pumps!!!!

mooreofit · Post by **mooreofit** » Sun Mar 11, 2012 8:27 pm

purdy.

Post by **dr.occa** » Mon Mar 12, 2012 12:23 am

mooreofit wrote:purdy.

Alan! Where've you been buddy!?

mooreofit · Post by **mooreofit** » Tue Mar 13, 2012 5:04 pm

needed a car break. im back.

www.86garage.com