AW11 Seats in an AE86

[arco]

yes yes. we need pictures

[McKenney]

Wizzurp has them now

Sent from my LG-MS690 using Tapatalk

[wizzurp]

I can snag some pictures if you guys want them for some reason.

[McKenney]

basically unbolt your ae86 seats from the rails, repeat this on the aw11 seats.
passenger side-line up both door side bolts from frame to rail, then line up the front bolt on the console side rail, the rear hole will have to be drilled.
driver side-all seat frame to rail bolts line up, but on the door side back support you'll need to drill a 1/2" or 13mm hole 1.25" down from the top hole to slide the lumbar lever splined shaft thru.
both sides- the bolts that hold the back support to the frame I put thru the fabric and into the frame. you can get under the fabric with a ratchet wrench but it's a pita to line up the bolts with the holes.
then bolt it in the car and go.

now if Wyatt will post pics it should all be explained...