gts clutch hardline

Technical Reference

Moderators: dr.occa, CBR_TOY

Post Reply
daveskatesallday
VIP Member
Posts: 1760
Joined: Sat Aug 15, 2009 5:04 pm
Location: エビス

gts clutch hardline

Post by daveskatesallday »

does anyone know how the gts clutch hardline is run through the engine bay??
on the motor i just pulled out of my car it had a sr5 bellhousing with the clutch hardline on the driver side but the gts bellhousing re-locates the slave cylinder to the passenger side and someone shipped me a gts clutch hard line but i can't find pictures of how it's run through the engine bay like if it goes behind the brake booster or what i know its not rocket science but i just want to make sure i bend it in all the right places so theres no issues if anyone knows or has pictures that would be a huge help thanks
"If you love life, don't waste time, for time is what life is made up of."

mooreofit
VIP Member
Posts: 3694
Joined: Tue May 12, 2009 8:38 pm
Location: spring tx
Contact:

Re: gts clutch hardline

Post by mooreofit »

if you go to my build thread you might see it run on the firewall.
[img]http://i300.photobucket.com/albums/nn17/mooreofalan/attachment-2-1-1-1-1.jpg[/img]

daveskatesallday
VIP Member
Posts: 1760
Joined: Sat Aug 15, 2009 5:04 pm
Location: エビス

Re: gts clutch hardline

Post by daveskatesallday »

i checked i can't get a good picture of it most of the pics are blurry and the clear ones i can't get a good enough look i can't tell which one it is
"If you love life, don't waste time, for time is what life is made up of."

mooreofit
VIP Member
Posts: 3694
Joined: Tue May 12, 2009 8:38 pm
Location: spring tx
Contact:

Re: gts clutch hardline

Post by mooreofit »

theres one picture on page 4 that gives you a good idea of where it goes and one on page 5. i forget witch line it is i can figure it out real quick and let you know.
[img]http://i300.photobucket.com/albums/nn17/mooreofalan/attachment-2-1-1-1-1.jpg[/img]

daveskatesallday
VIP Member
Posts: 1760
Joined: Sat Aug 15, 2009 5:04 pm
Location: エビス

Re: gts clutch hardline

Post by daveskatesallday »

Cool lemme know
"If you love life, don't waste time, for time is what life is made up of."

assassin10000
Tourist
Posts: 85
Joined: Tue Jun 08, 2010 2:39 am

Re: gts clutch hardline

Post by assassin10000 »

I have a great pic of it from my GTSR5 swap thread...

Image

Andrew

daveskatesallday
VIP Member
Posts: 1760
Joined: Sat Aug 15, 2009 5:04 pm
Location: エビス

Re: gts clutch hardline

Post by daveskatesallday »

thanks you are a life saver without the pic i was kinda on the right track but i would have been off more towards the passenger side haha i wasn't sure if it ran right behind the brake booster or in the middle behind it but this is exactly what i needed
"If you love life, don't waste time, for time is what life is made up of."

dr.occa
Hades - Site Admin
Posts: 7734
Joined: Tue Sep 04, 2007 1:49 pm
Location: On my hiney...in HOU
Contact:

Re: gts clutch hardline

Post by dr.occa »

Of course Andrew would have a great illustration. Doh!

daveskatesallday
VIP Member
Posts: 1760
Joined: Sat Aug 15, 2009 5:04 pm
Location: エビス

Re: gts clutch hardline

Post by daveskatesallday »

thanks for the most part the person who shipped it to me had to bend the line a little to get it in a container to ship to me so i had to bend it back its not too bad but not that clean as in your picture

also couldn't find a bolt to mount the bracket to the side so i just kinda left it free @_@
"If you love life, don't waste time, for time is what life is made up of."

Post Reply