Aw11 free car spare parts build

Post by **dr.occa** » Thu Apr 26, 2012 12:06 pm

Oh no LOL! What the hell were you doing!? Story please sir.

aj.hudson · Post by **aj.hudson** » Thu Apr 26, 2012 4:34 pm

Haha. Not really a interesting story but, I had my empty block on the stand and was bent over picking up stuff off the ground and spun around to pick up some other stuff and my face and the block tried to occupy the same space. Knocked me on my ass... Block didn't move lol

Post by **dr.occa** » Mon Apr 30, 2012 10:40 am

Ouch! Yeah, I did a similar thing but was under a 4AG dangling from the hoist. I forgot to slap on the engine mounts so I did that really quickly and went straight up from a squat forgetting that the hoist arm was right above my head. Ding dong! Had to sit down for a while after a few choice words through gritted teeth.

aj.hudson · Post by **aj.hudson** » Thu May 03, 2012 10:35 pm

Working on 2 projects... Phew.. Never again...
Anyways today I decided the mr2 needed some love.
Detabbed the bay/semi shaved and redid the trans mount as the other one I "eyeballed" was no bueno... Anyways its all good now and supports its own weight plus me jumpin on it... Should be okay. Haha
Next up is to prep the bay and paint it along with some custom shifter cables then motor sexy time (if parts ever come in)

Post by **dr.occa** » Fri May 04, 2012 9:47 am

Stellar man. It's good progress.

aj.hudson · Post by **aj.hudson** » Thu May 10, 2012 9:20 pm

Forgot to post these pics... Also is a 20v timing pulley the same as a 16v??

This thing would not come off!!! And due to the lip on the 20v oil pump I couldn't get any puller on there... Wound up cutting a lip to grab a hold of...

aj.hudson · Post by **aj.hudson** » Fri May 11, 2012 11:06 pm

Yep different part indeed.... More special order parts from Japan... Oh and my bearings won't be coming untill sometime in July... Whatever... I ordered some acl race from ipg and having them dfl coated... Hopefully the std size will be fine...
I shoulda went with my gut and just did a 5sfe torque monster swap... I'll have around 5k into this 20v swap by the time it's all said and done...

86boy · Post by **86boy** » Mon May 14, 2012 10:20 am

holy crap! 5k!

I hate waiting on parts.... I would be going insane if I had to wait for parts to come.... in July....

aj.hudson · Post by **aj.hudson** » Mon May 14, 2012 11:32 am

Yep prolly coulda done it cheaper by I got a crap motor and I don't like half assing things... Ya no point in waiting that long that's why I canceled and went with the acl.. But that damn timing pulley is gonna be a month... Damn damn damn...

86boy · Post by **86boy** » Tue May 15, 2012 9:45 am

I don't blame you for not half assing it. What's the point if you just half ass it? Oh that's right just to tear it back down and redo every week... i hate when people do that. I spent a lot of time fixing someone else's screw ups with my engine. So i def. feel your pain.

no aftermarket/US oem stuff that will work?

aj.hudson · Post by **aj.hudson** » Tue May 15, 2012 10:56 pm

Very true^ although some people do get lucky, I am not one of those people. I believe the acl stuff should work... As far as oem Toyota I guess the rod bearings are diff for the 20v...
I will be giving the acl's to my machinist who already has the block if the clearances work out and it all rotates smooth I will be happy..

aj.hudson · Post by **aj.hudson** » Fri May 18, 2012 9:41 pm

Yay! Another setback..... Bearings again... Lame... Looks like std rod bearings can't be ordered as acl is currently producing a new "batch" talked to the guys at IPG and they can get a set of .025 os and will be coating those and sending them out... This will result in more cost as my machinist will have to now cut my crank to match... But this will give total control over clearances, which will be better anyways.... Also got my toda oil pump gear installed in the pump housing today... So I guess I'm moving forward.... Lol

aj.hudson · Post by **aj.hudson** » Fri Jun 08, 2012 12:32 am

Put the non damaged piston on my rod and cleaned the pistons... Came out pretty damn clean! Also got my bearings and new timing gear.. Unfortunately now I have to wait on funds.. Might be parting out or selling my supra project as a whole..

aj.hudson · Post by **aj.hudson** » Sat Sep 15, 2012 3:40 pm

Been forever!! Another update though! Put my thinkin cap on and did some shim math...swappin shims and ordered new ones.. Damn shims are expensive!!! K1motorsports had em in stock though.. Motor is basically back together... Need to get the flywheel and clutch on then moun the tranny and put it in. Maybe next weekend!

: ImageUploadedByTapatalk1347741527.587237.jpg (61.2 KiB) Viewed 2465 times

: ImageUploadedByTapatalk1347741566.322078.jpg (48.71 KiB) Viewed 2465 times

Post by **dr.occa** » Sat Sep 15, 2012 10:03 pm

Very cool update aj. Digging the red stacks. Makes me think of FCRs.

www.86garage.com